Electrical Engineering Design
Power distribution, electrical design, fire alarm, security, and communication systems for residential, commercial, and industrial projects.
WELCOME / REMP CORP
Building systems that can be understood, measured, and improved.
Connect the existing building disciplines with practical sensing, control, monitoring, and fault-detection pathways.
One engineering partner
from building systems to edge intelligence.
REMP CORP
Engineering disciplines connected to the work in front of you.
ENGINEERING SERVICES
The disciplines you already rely on, organised for clearer delivery.
REMP Corp's established electrical and mechanical engineering services remain the foundation. The structure is being simplified so building and industrial work can be understood quickly, scoped accurately, and connected to intelligent systems when required.
Discuss an engineering briefMechanical Engineering Design
Mechanical systems, equipment coordination, load considerations, and practical design support from concept through delivery.
Building Electrical Engineering Design
Building power, life-safety, low-voltage, and communication systems planned as one coordinated environment.
Building Mechanical Engineering Design
HVAC, plumbing, fresh air, process ventilation, and equipment services for commercial and industrial facilities.
EXISTING SERVICE DETAILS
Original service content is preserved below. Expand a section to review the complete wording.
Electrical Design & Power Engineering
REMP Corp offers complete electrical engineering design solutions for residential, commercial, and industrial projects. Our services ensure safe, efficient, and code-compliant power distribution systems — from concept to construction.
Core Electrical Services:
- Electrical Load Calculations
- Building load summary (NEC/NBC/CEC-based)
- Demand factor, diversity, and peak load analysis
- Feeder and service sizing
- Power Distribution System Design
- Panel schedules and circuit layouts
- Transformer selection and sizing
- Generator integration (optional/backup power)
- Single-Line Diagrams (SLDs)
- Lighting System Design
- Interior and exterior lighting layouts
- Lighting control systems (occupancy sensors, timers, daylighting)
- Lighting fixture selection with lumen output calculations
- Emergency and egress lighting design
- Lighting Photometric & Lumen Calculations
- Lux level analysis per space type
- Energy-efficient fixture selection
- IES and LEED-compliant lighting layouts
- Controls & Automation
- Power and lighting control integration
- Building automation system (BAS/BMS) interfaces
- Low-voltage and smart system coordination
- Energy Analysis & Reporting
- Electrical energy modeling and simulation
- Compliance with NECB, ASHRAE 90.1, LEED, or local energy codes
- Custom Energy Reports for permit and incentive programs
Fire Alarm System Design
Our Fire Alarm Design Services Include:
- System Layout & Device Placement
- Smoke detectors, heat detectors, manual pull stations, horns/strobes, and annunciators
- Zoning strategy for efficient alarm and evacuation coverage
- Compliance with NFPA 72, ULC-S524, and local fire codes
- Wiring & Riser Diagrams
- Addressable or conventional system schematics
- Fire alarm riser diagrams and device loop layout
- Conduit and cable routing
- Power Supply & Battery Calculations
- Primary and secondary power source sizing
- Standby power duration (typically 24 hr standby + 5 min alarm)
- Voltage drop and circuit capacity checks
- Control Panel Selection & Integration
- Main fire alarm control panel (FACP) and remote annunciator locations
- Connection to sprinkler system (flow switch, tamper switch)
- Elevator recall and HVAC shutdown interfaces
- Firefighter telephone system (if applicable)
- Fire Alarm Load Calculation
- Calculation of current draw per circuit
- Total system capacity analysis
- Battery backup sizing and charger specs
- Coordination with Other Systems
- Sprinkler and fire protection systems
- Emergency lighting and egress paths
- Fire department connection points and panel access
Security & Communication System Design
REMP Corp offers expert design services for low-voltage systems, including CCTV surveillance, monitoring infrastructure, and communication networks for residential, commercial, and industrial facilities. Our solutions are scalable, secure, and fully coordinated with building architecture and electrical systems.
CCTV & Monitoring System Design
- Camera Layout & Coverage Planning
- Indoor/outdoor IP camera placement
- Motion detection zones & night-vision planning
- Field-of-view and blind-spot elimination
- System Architecture
- Network Video Recorder (NVR) integration
- Wired and wireless infrastructure (PoE, fiber, coax)
- Cloud or local storage configuration
- Power & Connectivity
- Power-over-Ethernet (PoE) design
- Backup power for security continuity
- Cable routing and termination plans
- Control & Monitoring Stations
- Monitor wall design and workstation planning
- User interface layout and software coordination
- Remote access and mobile view configurations
Communication System Design
- Structured Cabling Systems
- Voice and data cabling (Cat6/6A, fiber optic)
- Patch panel and rack layout
- Cross-connects and cable management
- Intercom & PA Systems
- Building-wide intercom design (audio/video)
- Emergency paging and public address systems
- Integration with access control and fire alarm
- IT & Communication Rooms (MDF/IDF)
- Network room layout and environmental control
- Equipment racks, grounding, and surge protection
- Cable tray and raceway design
- Telephone & VoIP System Design
- Telecom backbone planning
- IP telephony integration
- Network switch and router coordination
Kitchen Fresh Air System
Mechanical Engineering
REMP Corp is a multidisciplinary engineering firm offering comprehensive mechanical design and consulting services across a range of building types and sectors. Our team delivers innovative, efficient, and code-compliant solutions tailored to meet the unique needs of each project.
Our Core Services:
- Mechanical Engineering Design
- High-Efficiency HVAC System Design
- Plumbing System Design
- Fire Protection Engineering (Sprinkler system layout & hydraulic calculations)
- Energy & Building Assessments
- Energy Modeling & Simulation (ASHRAE, NECB, etc.)
- Energy Studies & Optimization
- Mechanical System Condition Assessments (for retrofits, upgrades & lifecycle planning)
REMP Corp is committed to sustainable design, energy performance, and long-term value for clients. Whether you're planning new construction or retrofitting an existing facility, we provide the engineering insight needed for success.
Plumbing System
Our Plumbing Design Services Include:
- Cold and Hot Water Supply Systems
- Pipe sizing and layout
- Pressure loss calculations
- Domestic water heater selection
- Recirculation system design (if needed)
- Sanitary Drainage & Vent Systems
- Drainage pipe sizing
- Waste and vent stack design
- Cleanout placement
- Sizing based on fixture units (FU)
- Stormwater Drainage Systems
- Roof drain and piping design
- Horizontal and vertical storm pipe layout
- Rainfall intensity calculations
- Sump and pump design (if required)
- Plumbing Fixture Layouts
- Code-compliant fixture placement
- Fixture unit (FU) calculations
- Coordination with architectural plans
- Plumbing Load Calculations
- Cold/hot water demand
- Sanitary and storm drainage capacity
- System peak flow estimates
- Coordination with Mechanical and Fire Protection Systems
- Ensure no spatial or functional conflict
- BIM coordination (Revit/AutoCAD)
HVAC system
We delivers advanced HVAC design solutions tailored for both commercial buildings and industrial facilities, with a focus on energy efficiency, occupant comfort, system durability, and code compliance.
Our HVAC Design Include:
- Heating & Cooling Load Calculations
- ASHRAE-based thermal load analysis
- Zoning and capacity planning
- Peak demand and seasonal optimization
- System Design & Equipment Selection
- Centralized and decentralized HVAC systems
- Heat pump, VRF/VRV, rooftop units, boilers, and chillers
- Integration of energy recovery systems (HRV/ERV)
- Ventilation System Design
- Fresh air and exhaust air systems
- Industrial-grade ventilation for manufacturing and storage
- Dust, fume, and contaminant control
- Ductwork & Piping Layout
- Airflow optimization
- Duct and hydronic piping sizing
- Pressure loss, velocity, and acoustic control
- Controls & Automation
- HVAC control system design (thermostats, sensors, BMS integration)
- Demand-controlled ventilation (CO₂ sensors)
- Time-of-use and zoning strategies for energy savings
- Industrial HVAC Solutions
- Ventilation for process areas
- Explosion-proof HVAC design (where required)
- High-capacity exhaust and filtered make-up air systems
- HVAC support for cleanrooms, data centers, and laboratories.
INDUSTRIAL SYSTEMS
From connected equipment to more autonomous operations.
A new capability layer for factories, test environments, and industrial operations.
Design the sensing, control, and edge layer around the operation you actually need to run.
Autonomous factory systems
Architectures that connect equipment, data, controls, and operator decisions across an industrial workflow.
Inspection and test systems
Integrated sensing and test workflows for repeatable checks, traceable results, and clearer intervention points.
Sensor systems
Temperature, pressure, flow, vibration, and other field signals connected to the right edge or monitoring layer.
Embedded and board-level design
Embedded system and custom board design for focused sensing, control, and data acquisition requirements.
VISION + INSPECTION
Make the inspection task legible before choosing the technology.
Machine vision is treated as a complete system: optics, lighting, sensing, processing, decisions, and the operational handoff that follows. The page structure keeps the application in view rather than presenting a disconnected list of technologies.
01ObserveDefine the object, condition, or signal to inspect.
02MeasureChoose sensing, image, and processing inputs.
03DecideConnect results to the operator or control workflow.
SMART BUILDINGS
Building systems that can be understood, measured, and improved.
Connect the existing building disciplines with practical sensing, control, monitoring, and fault-detection pathways. The intent is a building system that supports operators instead of adding another isolated dashboard.
Plan a building systems review
HVAC + energySystem design, monitoring, and optimization pathways.
Life safety + communicationFire alarm, security, and communication systems in context.
Fault detectionSignals and conditions surfaced where action is possible.
Energy and indoor conditions
Connect HVAC design, energy analysis, and environmental signals to the spaces people use.
Environmental sensing
Temperature and other field signals provide context for comfort, equipment, and operational review.
Safety and communication
Fire alarm, CCTV, structured cabling, intercom, and public address systems stay coordinated.
Connected building operations
Gateways and edge nodes provide a practical route from equipment signals to a usable operations view.
HOW WE WORK
A clear path from engineering question to working system.
Brief
Frame the requirement
Clarify the building, industrial, or inspection problem and the evidence needed.
Design
Design the system
Coordinate disciplines, interfaces, sensors, controls, and practical constraints.
Test
Integrate and test
Validate the system path with the people and equipment that will use it.
Handoff
Support the next decision
Deliver clear documentation and a usable handoff for the next stage.
WHO WE DO
Integrated engineering for buildings, industry, and intelligent systems.
REMP Corp brings Mechanical, Electrical, and AI Engineering into one coordinated design conversation. The work starts with the project requirement, then connects the disciplines, systems, and decisions that shape delivery.
Mechanical Engineering
Mechanical components and systems tailored to project requirements, performance goals, and regulatory standards.
Electrical Engineering
Power distribution, lighting, and control systems designed for safety, efficiency, and scalability.
AI Engineering
AI tools and automation strategies that support system performance, energy use, and intelligent decision-making.
OUR PROCESS
Consultation & Needs AssessmentUnderstand project goals, technical requirements, and constraints.
Design & EngineeringDevelop coordinated solutions across mechanical, electrical, and intelligent systems.
Integration & DeliverySupport the transition from concept to completion with clear coordination and documentation.
Original Our Expertise text
At REMP Corp, we specialize in Mechanical, Electrical, and AI Engineering—offering integrated solutions for a wide range of industries.
Mechanical Engineering: We design and manufacture high-quality mechanical components and systems, tailored to meet the unique requirements of each project. Our experienced team delivers precise, efficient, and durable solutions that align with both performance goals and regulatory standards.
Electrical Engineering: From power distribution to lighting and control systems, we provide innovative electrical designs that ensure safety, efficiency, and scalability.
AI Engineering: Leveraging artificial intelligence, we develop smart engineering tools and automation strategies that enhance system performance, optimize energy usage, and drive intelligent decision-making in complex infrastructures.
With a strong foundation in engineering excellence and a forward-looking approach, REMP Corp delivers results that exceed expectations.
AI Hardware and Software Design
At REMP Corp, we provide comprehensive AI hardware and software design services tailored for smart buildings, industrial automation, and intelligent infrastructure. Our expertise spans from algorithm development to embedded system design, ensuring fully integrated, high-performance AI solutions.
Our services include:
- AI algorithm design, modeling, and optimization
- Embedded hardware design (ARM, FPGA, DSP, SoC)
- Custom AI control systems for automation and smart operations
- Integration of AI software with real-time hardware platforms
- Edge AI solutions and intelligent system deployment
We bring together cutting-edge technology and practical engineering to help clients build efficient, scalable, and future-ready AI systems.
CONTACT
Bring the real engineering brief.
Tell us what needs to be designed, connected, inspected, or improved. This draft form does not submit data until a verified contact destination is configured.
Emailrempltd@outlook.com
General inquiriesREMP@REMPCORP.COM
Phone403-618-8653
LocationCalgary, AB, Canada